20-Overnight Mode - MCZ CLUB COMFORT AIRMATIC 14 M2 Operation And Cleaning

20-OVERNIGHT MODE

OVERNIGHT MODE
In OVERNIGHT mode, you can set the intended temperature in the room and the equipment runs at low power until the chosen temperature
is reached. Once the temperature is reached, the equipment reduces its power to a minimum to hold the temperature.
If even the minimum operating speed causes a further increase in the room temperature, it is advisable to consider the combined
operation with the START&STOP function (see the specific chapter)
Pressing the keys continuously rapidly adjusts the increasing or decreasing degrees in 0.5°C steps for the first 5°C and 1°C steps
for the remaining.
In this mode, the equipment works in such a way as to ensure the minimum possible noise, combining a decent heating capacity to
keep the rooms warm, e.g. at night or in very isolated rooms/homes.
Technical Dept. - All rights reserved - Reproduction prohibited
Press the key to select the
The icon and the three adjacent dashes light up red.
All the buttons are lit except the fan button as ventilation cannot be changed in this mode.
The room temperature and the set temperature that is to be reached appear at the centre of the
display and of the crown.
The icon is only present if the product is connected to a router; otherwise it is off and the
is present if Bluetooth has been enabled.
The keys allow you to modify the temperature and if you press them, all the texts at the
centre of the display disappear and only the current setting appears.
The first press only enters the temperature edit mode, whereas pressing the keys again will change
the value.
Once the change is made, the selected temperature appears for 3" and if no further inputs are
made, it is confirmed and the display returns to the previous image with the desired and updated
temperature.
icon.
icon
17