Echo POWER PRUNER DPPT-2600H Operator's Manual page 22

ASSEMBLY
2. Loosen clamp knob (E) turning
counterclockwise.
3. Pull upper tube (F) out of
fiberglass lower tube 127-152
mm (5-6 in.), then slide (F)
back into fiberglass lower tube
exposing inner drive shaft (G).
Align and join star shaped
drive end of inner drive shaft
with cutting attachment shaft.
4. Align ridges (J) on upper tube
with seams in cutting
attachment.
5. Slide together, aligning locator hole in cutting attachment with locating
hole in upper tube (I).
6. Install and tighten locator
screw (B). Tighten two (2)
cutting attachment screws (A).
22
DPPT-2600H
E
F
J
G
A
B
X7508310101
© 01/24 ECHO Incorporated
A