Sony BRAVIA XR65X95LU Manual page 14

Terminal
[6] Getting Started
How the LEDs light up
You can check the status of the TV by looking at how the LEDs light up.
The location of the LEDs varies by model.
Before connecting cables, disconnect the AC power cord
(mains lead) of both the TV and AV receiver.
If you do not use the CENTER SPEAKER IN terminal or the S-
CENTER SPEAKER IN input, change the following setting to
prevent noise from the speakers.
Press the (Quick Settings) button on the remote control, and
disable [TV centre speaker mode] in [Settings] — [Display &
Sound] — [Audio output].
S-CENTER SPEAKER IN
Connects the TV and an audio device with an S-CENTER OUT
output/jack using a TV centre speaker mode cable. Before
connecting, make sure you unplug the AC power cord (mains lead) of
the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker (only models
with TV centre speaker mode).
Note
If you do not use the CENTER SPEAKER IN terminal or the S-
CENTER SPEAKER IN input, you will need to perform the
following steps to prevent noise from the speakers.
Press the (Quick Settings) button on the remote control, and
disable [TV centre speaker mode] in [Settings] — [Display &
Sound] — [Audio output].
Description