Erasing Simplesound & Other "Punch Through" Commands - Universal Remote URC-R6 Owner's Manual

Erasing SimpleSound & Other "Punch
Through" Commands
STEP 1: Press and hold the Component button
you want to erase volume control from, such
as DVD or VCR and the SELECT [SEL] button
at the same time for two seconds until the
Component LED light turns on.
STEP 2: Press the VOLUME UP button and
the same component button from Step 1.
The component LED light will blink three
times to confirm the erasure.
VOLUME
UP
Repeat Steps 1--2 to erase SimpleSound com-
mands from other components.
NOTE: To erase other "Punch Through" com-
mands, simply press the following buttons in
place of VOLUME UP in Step 2:
• For Channel Control, press: CHANNEL UP
• For Transport Control, press: PLAY
• For OSD Control, press: MENU
Page 28
COMPONENT
BUTTONS
SELECT