Erasing Macropower & Other Macro Commands - Universal Remote URC-R6 Owner's Manual

Erasing MacroPower & Other Macro
Commands
STEP 1: To erase MacroPower commands on the
POWER ON or SYSTEM OFF button, press and
hold either the POWER ON or SYSTEM OFF button
and the MUTE button simultaneously for two seconds
until the current status component LED turns on.
IMPORTANT: If you don't proceed to the next
step within 30 seconds, the LED will turn off and
exit set-up mode and you will need to start over.
STEP 2: Press the CHANNEL UP button to erase
and exit Erase mode. The component LED light will
blink three times to confirm the erasure.
SYSTEM
POWER
OFF
ON
CHANNEL
MUTE
UP
NOTE: To erase other Macros, simply press the
appropriate button in Step 1 in combination
with the MUTE button.
Page 27