Advertisement
TECHNICAL GUIDE
REMARKS ON DISASSEMBLING AND REASSEMBLING
2
DIAL
•
How to install
Set the notched portions of the DIAL to the guide posts (4 posts)
of the HOLDING RING FOR DIAL, and check that the DIAL is
fixed in position.
3
DIAL SHEET (Not used in some models)
•
How to install
Set the notched portions of the DIAL SHEET to the guide post
(4 posts) of the HOLDING RING FOR DIAL, and check that the
DIAL SHEET is fixed in position.
REMARKS ON DISASSEMBLING AND REASSEMBLING THE MOVEMENT
4
SOLAR CELL
5
HOLDING RING FOR DIAL
* It is not necessary to separate the SOLAR CELL and the HOLDING RING FOR DIAL except in the case
that a part needs to be replaced.
• Disassembling and Reassembling of HOLDING RING FOR
DIAL
<Disassembling>
1. The HOLDING RING FOR DIAL is fixed to the movement by
the hooking portion at 12 o'clock and 6 o'clock positions.
2. Insert the tip of a screwdriver into the gap between the
hooking portion and main plate to release the hooking
portion from the main plate as shown with the arrow mark
in the illustration.
8/18
Cal. V137A
Advertisement
