1. Manuals
  2. Brands
  3. Heiniger Manuals
  4. Power Tool
  5. ONE/G
  6. Translation of the original instructions

Heiniger ONE/G Translation Of The Original Instructions

Single speed shearing plant
Hide thumbs Also See for ONE/G:
Table of Contents

Advertisement

Quick Links

Download this manual
swiss made
Eintourige Schuranlage
de
Single Speed Shearing Plant
en
Tondeuse à 1 vitesse
fr
Gruppo di tosatura a una velocità
it
Esquiladora de una velocidad
es
Eentoerige scheeraandrijving
nl
Klippeanlæg med 1 hastighed
da
Stationär klippmaskin för får, 1 hastighet
sv
Enhastighets klippemaskin for sau
nb
Yksinopeuksinen leikkuulaite
fi
Acionamento de tosquia de velocidade constante Tradução do manual original
pt
Κουρευτική μηχανή μίας ταχύτητας
gr
Version/Index: ONE/G
Original-Betriebsanleitung
Translation of the original instructions
Traduction de la notice originale
Traduzione delle istruzioni originali
Traducción del manual original
Vertaling van de oorspronkelijke handleiding
Oversættelse af den originale brugsanvisning
Översättning av bruksanvisning i original
Oversettelse av den originale brukerveiledningen
Alkuperäisten ohjeiden käännös
Μετάφραση πρωτοτύπου οδηγιών χρήσης
05-21

Advertisement

Table of Contents
loading

Related Manuals for Heiniger ONE/G

Summary of Contents for Heiniger ONE/G

  • Page 1 Översättning av bruksanvisning i original Enhastighets klippemaskin for sau Oversettelse av den originale brukerveiledningen Yksinopeuksinen leikkuulaite Alkuperäisten ohjeiden käännös Acionamento de tosquia de velocidade constante Tradução do manual original Κουρευτική μηχανή μίας ταχύτητας Μετάφραση πρωτοτύπου οδηγιών χρήσης Version/Index: ONE/G 05-21...

  • Page 2: Table Of Contents

    Table of contents Safety regulations ................3 Introduction ..................3 Symbols and warning notes ............... 3 Stipulated usage ................. 4 Basic safety principles ............... 4 1.4.1 Power supply connections ..............4 1.4.2 Safety precautions ................4 1.4.3 Noise emission / personal protective equipment ....... 5 1.4.4 Residual dangers ................

  • Page 3: Safety Regulations

    NOTE! Read these instructions carefully before starting operation. Safety regulations Introduction y This chapter describes the safety regulations that are to be taken into consideration as a matter of course when using the shearing plant. y All persons who carry out work on and with the shearing plant must read the operating instructions.

  • Page 4: Stipulated Usage

    Stipulated usage The shearing plant’s intended purpose of use is described in Chapter 2.2, “Purpose of use”. Use for any other purposes, par- ticularly on people and dangerous types of animals, especially predators, is expressly forbidden. The shearing plant must only be used in dry areas. The details contained in Chapter 2.3, “Technical data”, are to be considered as legally binding limit values and characteristic data.

  • Page 5: Noise Emission / Personal Protective Equipment

    Avoid kinks or coils in the cable. Never wind the power cable around the plant during periods of storage. This can result in breaks and damage to the insulation. Ensure that animals do not stand on or walk over the cable, and that they do not get caught up in the cable.

  • Page 6: Replacement Power Cable

    1.4.5 Replacement power cable NOTE! If the power cable of this equipment is damaged, it must be re- placed by the manufacturer or its after-sales service or a similarly 1.4.6 Supervision of children WARNING! Children should be supervised to ensure that they do not play with the equipment.

  • Page 7: Purpose Of Use

    Pos. Description Quantity Pos. Description Quantity Switch support Centering washer Micro switch Countersunk screw Socket head cap screw Phillips Insulating washer Retaining ring for shaft Washer PT-screw counter- Spring for switch sunk Capacitor Lever for switch Capacitor Cord black Drive housing ONE Ring spanner LS-screw Catch spring ONE/...

  • Page 8: Equipment

    Equipment y Portable shearing plant y Operating instructions y Screwdriver y Drip feed lubricator 100 ml y Universal grease Options y Flexible drive, worm y Flexible drive, pin y Ferrule short y Shearing handpiece, Icon, worm y Shearing handpiece, Icon, pin y Combs and cutters for the shearing handpiece Initial start-up Important notes...

  • Page 9: Switching The Shearing Plant On / Off

    3.2.2 Assembling the flexible drive Start up the motor (see Chapter 3.3). ally (Diag. 3, pos. b). sleeve and then position this by means of slight pressure upwards until the lock button engages in the hole (Diag. 3, pos. c). Switching the shearing plant on / off CAUTION! Make sure that the ventilation holes are always clear (Diag.

  • Page 10: Lubrication

    Lubrication ce a lack of lubrication is the most common source of faults for unsatisfac- tory shearing results. 4.3.1 Portable shearing plant Requires no lubrication. 4.3.2 Flexible drive prior to each period of operation placed (Diag. 4, pos. a). after 100 hours of operation arings.

  • Page 11: Troubleshooting And Repairs

    It is designed to give longevity and high perfor- mance. If spare parts are used during the life of this product, please ensure that they are genuine Heiniger parts. Failure to use genuine Heiniger spares may reduce the performance of this precision engineered product and will void any warranty claim.

  • Page 12: Environmental Protection And Waste Disposal

    Malfunction Cause Rectification Motor always switching Cutter blocked. Remove blockage. off. Mechanical damage in For the purposes of fault the shearing handpiece the shearing handpiece and restart the plant. If the fault persists, uncouple the rigid drive downtube shearing plant. Rectify any damage.

  • Page 13: Material Groups

    Material groups Please hand this in to a service point or your local specialist electrical work- shop when the machine is to be dismantled. Material contained in pos. X taken from Diag. 1 Rubber Polyamide PA 2/10/15/19 Polypropylene PP 7/32 Iron/steel 3/4/5/8/9/11/12/16/17/23/25/26/28/29/30/31/34/35/37/40 Copper...
  • Page 14 (only USA)
  • Page 16 Please do not cut off the warranty card from the instruction manual. © 2021 Heiniger AG. All rights reserved. This instruction manual may not be duplicated or distributed, neither completely nor in extracts, or by electronic or mechanical means (including photocopying), transmitted or used for the purpose of competition without authorisation from Heiniger AG.

This manual is also suitable for:

One

Table of Contents