Table of Contents
Advertisement
Configuring MPE
Step No.
Prompt and Response
40
PHONE NUMBER? telephone number
or
(RETURN)
(Asked only if your response to 39 was YES.)
NOTE
European modems and auto call units require a character to be
configured into the telephone number. This delay is achieved
by the letter D.
The configurator file will receive only one phone number. The
phone number is configured with hyphens (not parentheses):
nnn - nnn - nnnn.
The character set needed for the phone number is:
o
through 9
/
(separator used for ACUs that have a second
dial tone detect)
E
(end of number)
D (delay of one second)
#
(defined by the local telephone system)
*
(defined by the local telephone system)
41
LOCAL 1D SEQUENCE? id sequence
or
(RETURN)
(MRJE and X. 25 ignores your response)
42
REMOTE 1D SEQUENCE? id sequence
or
[RETURN)
(RJE, MRJE, and X. 25 ignore your response)
A-6
Advertisement
Table of Contents
Troubleshooting
