Team Orion Advantage ONE 1X6A Manual

The Team Orion Advantage One 1x6 is a fast charger for RC Lipo,
Life, NiMH, NiCd and Pb batteries.
Input voltage
Battery type
Number of LiPO-LiFE cells
Number of NiMH cells
Charging power
Charge current
Balancing current
1. Connect the charger to the mains using the cable supplied.
2. Connect the charging cable to the charger, observing the correct polarity.
3. Connect your battery to the charging cable connector.
4. (Lipo and Life) Connect the balancing cable to the charger's balancing port.
The Advantage One 1x6 charger can charge all kinds of batteries. Here's an example of how to
charge RC Lipos batteries. Navigation is similar for other battery types.
1. Use the BATTERY TYPE button to select the battery type, changing with each press.
2. When you're on Lipo BATT, press START to confirm.
3. Use the + and - buttons to select the charging mode.
4. Lipo Balance mode is recommended for normal charging. Lipo Fast CHG is a faster
charge that will finish faster, charging your batteries to around 90%. Lipo Storage allows
you to put your batteries into storage if you're not using them for a few days or weeks. Lipo
Discharge discharges your batteries.
5. Once you've selected your charging mode, press START to confirm. The charging current will
flash, which you can vary using + and - , and confirm by pressing START. Now your battery
voltage will flash, which you can vary using + and - , and confirm by pressing START.
6. To start charging, press the START button for 2 seconds, and the charger will indicate R: and
the number of cells detected. On the right, your setting is indicated after the S: the two values
must be identical. If so, you can confirm by pressing START to start charging.
7. During charging, you can view the voltage of each element using + and - .
8. To end charging manually, press BATTERY TYPE (stop).
Quick Start Guide
Connections before charging
Battery charging
100-240V AC
LiPO - LiFE- NiMH - NiCd - Pb
1S - 6S
1-15 cells
80W
0.1 A – 6 A
300 mAh