Advertisement
EPSON SC-P10000/P20000
Cleaning Inside / outside of the printer
Cleaning the Paper Feed stabilizer
2
Sensor window :
Clean the Paper Feed Stabilizer sensor
window using a cleaning stick or any cotton
swab.
If the Feed Stabilizer sensor window is very
dusty , moisturize the cotton swab with few
drops of soapy water.
Remove excess of water before wiping the
Feed Stabilizer sensor window.
15
Cleaning the Fan exit surface
3
It's important to check the fan exit are not obsutrated by
any dust, fibers or other substance. The presence of dust
may reach print head and other sensitive printer part.
When dust are visible onto the Fan exit surface, use a small
vacuum to eliminate all the dust.
ETS Prographics – Nov 2017
Advertisement
