Advertisement
EPSON SC-P10000/P20000
Cleaning Inside / outside of the printer
1
Cleaning the Platen & Borderless Porous Pads
Using a fiber free soft cloth,
clean the platen surface from
backward to frontward:
IMPORTANT:
If you face a very dusty platen, use a fiber free cloth lightly mosturized with water
to remove the dust with more efficiency. Do not hesitate to wring the cloth to
remove the excess of water before use.
14
In case of some particles of fiber
or dust inside the platen suction
holes, use a small twizzers or
thooth-peek to remove those
particles
Make sure the printer AND control panel are
totally OFF without any warning or Led
activated.
Unplug the power cable and wait 1mn before
any other action. - Open the printer top cover.
In case of some fibers or dust accumulated
onto the porous pads, use a cleaning stick to
remove those particles.
IMPORTANT:
Never force wiping the porous pads. They may
get out from the platen.
ETS Prographics – Nov 2017
Advertisement
