Operation - Dometic BORDBAR TB08 Operating Manual

BordBar TB08
6

Operation

!
WARNING! Fire hazard!
• When positioning the device, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
A
NOTICE!
• Ensure that only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
• Ensure that food or liquids in glass containers are not excessively
refrigerated. Liquids expand when they freeze and can therefore
destroy glass containers.
I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (see also
chapter "Cleaning and maintenance" on page 12).
Fastening the cooler on the seat
➤ Place the cooler on a seat (passenger seat or the middle seat in the back).
➤ Thread the seat belt into one of the belt holders and fasten the cooler onto the
passenger seat (fig. 2 B, page 3) or the middle seat (fig. 2 C, page 3).
➤ If you want to position your cooler between two seats (fig. 2 A, page 3), use the
fastening and carrying strap supplied (fig. 3, page 4) to do this.
Switching the device on and off
➤ Plug the DC connection cable (fig. 4, page 4) into the cigarette lighter socket
in the vehicle.
➤ Push the slide switch into the required position.
✓ The cooler is switched on and starts cooling or heating the interior.
✓ The respective LED lights up.
➤ If you want to switch off the cooler, disconnect the plug.
EN
Operation
11