Sym MMBCU Owner's Manual page 10

cancelled automatically to avoid mistakenly touching the throttle and the engine is started.
To re-start the engine, please press the electrical start button while applying brake.
 Under the Idling Start & Stop mode, when the engine cannot be re-started by slightly
opening the throttle. Please turn off the Idling Start & Stop mode and have your scooter
checked by an authorized SYM dealer.
Ⓓ
Oil Check Indicator Light

The oil check indicator shows how long the engine oil is used. The oil check indicator light
turns on at every 1,000km riding distance according to the oil distance meter.

When this indicator comes on, please check the oil level by oil level gauge. In oil meter
mode, quickly press the S button twice to reset the oil check indicator light.
Ⓔ EFi Warning Indicator Light
 When the main switch is turned on, the EFi warning indicator remains on initially. It should
go off immediately after the engine is running. It displays the condition if the EFi system is
working correctly. If there is any problem on the EFi system, the warning indicator remains
on all the time. Please contact your SYM authorized dealer if this indicator goes on.
Ⓕ High Beam Indicator Light

The high beam indicator turns on with high beam headlight is turned on.
ⒼOdometer

shows the total distance in kilometers the scooter has been ridden, ranging
0~99999km，and will return to 0 and starts working again.

shows the distance in kilometers since it was last reset to zero, ranging
0.0~999.9km，and will return to 0 and starts working again.
In trip meter mode, push S button for more than 2 seconds to reset trip meter.

records how long the engine oil is used, ranging 0.0~9999.9km，and will return to 0
and starts working again.
In oil distance mode, quickly push S button twice to reset oil distance meter.

Switch
ⒽABS Indicator Light

The ABS (Anti-lock Brake System) indicator light goes on when the main switch is turned on
and goes off shortly after the scooter starts moving. If the ABS is normal, it stays off. If
something is wrong with the ABS, the indicator goes on and stays on. When the indicator
light is on, the ABS does not function, but if the ABS fails, the conventional brake system will
still work normally.
ⒾEngine Overheat Indicator Light
 When engine overheat indicator light is on during riding, the coolant temperature is
overheated. Please check if the coolant is within standard level. Contact your SYM
authorized dealer, if there is abnormal situation.
ⒿTCS Indicator
The TCS indicator flashes when traction control has engaged. If the traction control system is
turned off, this indicator will go on. This indicator comes on whenever the ignition switch is
turned off and turned to "On" position; this indicator will not go off until the engine is started. If
the indicator does not go on after turning the ignition switch on, or if the indicator remains on
when the engine is started, have the scooter checked by an authorized SYM dealer.
/ / by pushing M button.
8