Calling Stored Numbers; Clearing A Memory Location - Uniden MINI200 Owner's Manual

TIP
Put the phone numbers
that you call the most in
the first nine memory
locations. Then use
speed dial to call them.
CAUTION
Within the super speed
dial feature, location 9
is reserved for
emergency calling. If
any service provider is
available (even one the
phone isn't registered
with), you can use the
emergency call feature.
HINT
To exit memory mode,
press or .
end clear

CALLING STORED NUMBERS

Speed Dial
Press , the two-digit memory location number
mem
(01-50) and
send
Or, press , the one-digit number for 1 through 9;
mem
then press .
send
Super Speed Dial
You can super speed dial from memory locations
1 through 8. Caution: location 9 is for emergency only!
1) From the standby display,
press and hold the one-digit
number (only for locations
1 through 8) until it appears
in the display.
2) The display changes to:
The call is in process.

CLEARING A MEMORY LOCATION

1) To select the location,
press and the two-digit
mem
location number (01 - 50).
Example: 01
2) To clear the number,
press and hold
clear
3) Press for yes (to delete).
The display returns to standby.
or
Press for no.
To return to standby,
press .
end
.
.
11