Setting Up Your Phone; Installing The Battery; Charging The Battery - Uniden MINI200 Owner's Manual

Setting Up Your Phone

SETTING UP

INSTALLING THE BATTERY

Your MiniCel comes with either one of the following:
580 mAH nickel metal (MC580N) or
580 mAH Lithium-ion (MC580L)
850 mAH Lithium-ion (MC850L).
1) Line up the notches and
metal contacts on the bottom
of the battery and the base
(the back of the MiniCel).
Make sure the label
side is facing
the phone.
2) Gently press the battery top until it
clicks into place.

CHARGING THE BATTERY

1) Plug the AC adapter cord into the
input jack on the side of the phone.
2) Plug the AC adapter into a standard
120 VAC wall outlet.
Use only the Uniden AC adapter
supplied with this phone.
DO NOT use an outlet controlled
by a wall switch.
If you turn the phone on while the battery is charging,
will show in the display.
CHARGING
3) Charge the battery for 3 hours.
If the power is on when the battery
is fully charged, the display reads:
HINT
Before using your phone, fully charge
the rechargeable battery pack.
We recommend that the battery pack
charges for 3 hours.
5