Table of Contents
Advertisement
HINT
To exit memory mode,
press
or
.
end
clear
10
MEMORY PROGR AMMING
Memor y Programming
STORING NUMBERS AND NAMES
The MiniCel has 50 memory locations (01 through 50).
You can also store a 10-digit description or name to
identify the phone number. There are three sources to
enter numbers into memory: the scratch pad, entered in
standby or the recall numbers list.
1) With the number in the display,
press and hold
2) Enter the location number where you want to store
the number. Example: location 01
To search for an empty location, press either
At the empty location, press
If all the locations are full, the
appears and an error tone sounds.
If the location is occupied,
you will be prompted:
Example: you want to replace the number in memory,
press
for yes.
3) If you want, you can enter a
10-character name with the
keypad. Example: HOME
4) To store the name or to finish,
press
. You will see:
mem
After two seconds, the display
returns to standby.
CHECKING MEMORY STATUS
From the standby display,
press
three times.
mem
To return to the standby display,
press either
mem
for one second.
mem
mem
MEMORY FULL
,
or
.
end
clear
or
.
message
.
Advertisement
Table of Contents
