Bosch AVIOTEC 8000i IR User Manual page 6

6 en | Safety instructions
Notice!
i
No detection of moving fire.
Moving fires might not be detected by the video-based fire detection. An example of a
moving fire is a fire on a moving conveyor belt.
Notice!
i
Ensure that you are always using the latest version of the documentation and the current
camera firmware. The manufacturer will not be held liable for any damages resulting from
the use of older versions. Refer to: https://www.boschsecurity.com
Notice!
i
No direct connection to fire services in EN54 compliant installations.
Authorities can allow a connection to fire services after verifying alarms in a monitoring
center. Exceptions are possible due to local regulations.
Notice!
i
Avoid obstructions in the field of view!
Covered fires cannot be detected correctly. An unobstructed view of the detection area is
necessary.
Notice!
i
Bright strongly illuminated areas in the background (e.g., white areas, sun or sky) limit the
detection of flames or can lead to flames not being detected.
Notice!
i
Flame-colored background in the picture is to be avoided, since a reliable detection cannot
be ensured!
Notice!
i
Qualified personnel only.
Assembly and installation must only be performed by qualified personnel.
Caution!
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must
!
be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power
Source).
Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
Notice!
i
Optimized smoke detection.
The video-based fire detection algorithm is optimized for smoke of smoldering fires.
2023.10 | 02 | F.01U.414.168
User manual
AVIOTEC 8000i IR
Bosch Sicherheitssysteme GmbH