Advertisement
TO RECHARGE POWER BANK
● Connect the USB C to USB A cable (included in the pack) to a USB A wall charger, the
power bank will then automatically start charging.
● Connect a USB C to USB C cable (not included in the pack) to a USB C wall charger,
the power bank will then automatically start charging.
● Connect a USB C to Lightning cable (not included in the pack) to a USB C wall charger,
the power bank will then automatically start charging.
● During charging, the LED indicators will flash to show charging status.
● When charging is complete, the LED indicator will remain on.
CHECKING REMAINING BATTERY CAPACITY
● Do not alter or remove the factory plates or identification labels.
● Do not disassemble the device.
Led
⚫
⚫ ⚪ ⚪ ⚪
⚫ ⚫ ⚪ ⚪
⚫ ⚫ ⚫ ⚪
⚫ ⚫ ⚫ ⚫
On /
⚪
Off
Remaining Capacity
Less than 25%
25% to 50%
50% to 75%
75% to 100%
Advertisement
