A. Arc
B. Purge
C. Weld Switch:
D. Argon LED
E. Wait LED
F. Ready LED
G. Power
H. Level selector
I. Electrode Holder
J. Red socket
K. Black socket
Front Panel Controls
Argon gas and weld current controlled by the "Weld"
switch. LED indication.
Allows the gas line and electrode shield to be purged
of air prior to a new welding period.
Initiates a welding operation (in "arc" mode also
opens the Argon valve).
Indicates when the Argon control valve is open and
gas is flowing.
Glows when weld charge is building.
"Ready to Weld" indication.
Rotary control of the capacitor charge voltage.
Selects the total capacitance available giving
the following values with LED indication.
"LO" = 0 to 6 Joules
"MED" = 0 to 28 Joules
"HI" = 0 to 64 Joules
Holds the replaceable carbon electrode
Which is accessible by removing the outer Argon
Shield. Also holds the red filter in place.
Output socket for using the pliers supplied or the
Optional resistance welding pen.
Output socket, this is only used with the resistance
welding plate in conjunction with the welding pen
- 5 -