Front Panel Controls; Rear Panel Controls - Omega TC-WELD User Manual

A Power On LED
B Wait LED
C Ready LED
D Argon On LED
E Black (-) Socket
F Red (+) Socket
G ON / OFF Switch
H Argon Control Switch
I Power Setting Selector
J Welding Nozzle
Argon In Connects to the argon hose allowing the welder to weld with argon input.
Foot Switch Connects to the foot switch and able to use the foot switch to control argon ow.
Fuse Use a fuse with 2 amps rating only.
Power In Connects to the power cable. Range 90-260 VAC / 50-60 HZ .

Front Panel Controls

Indicates power is connected.
Glows when weld charge is building.
Indicates it is ready to weld.
Indicates argon is on.
Output socket connects to the electode. Negative end.
Output socket for using the pliers. Positive end.
To switch the poswer ON and OFF.
ARGON ON allows continuous ow of argon.
LEVEL position is turning the argon o .
PURGE allows short burst of argon gas ow.
Adjusts output power level.
Holds the electrode for welding.

Rear Panel Controls

5