Table of Contents
Advertisement
Current recording
Play images
(30 seconds
before)
Playing while you are recording
Reviewing the recorded images
while recording (Time Slip)
RAM
You can play the program being recorded to check that it is being
recorded correctly. You can also check parts that were recorded pre-
viously.
Preparation
Switch [DVD, TV] to "DVD".
While recording or timer recording
Press [TIME SLIP].
Play starts from 30 seconds previous.
The play images are shown for 5 seconds as a picture-in-picture with
the recording images, then they are shown in full.
To continue to show both the recording and play
images
Press and hold [TIME SLIP] for about 3 seconds.
To change the part being played
Main unit only
! Press [TIME SLIP] on the main unit within 5 seconds to enter the
time.
Play starts from the time you entered.
Note
You cannot change the position being played with the remote
control.
To stop play and recording
! Press [ , STOP]. Play stops.
Wait 2 seconds.
@ Press [ , STOP]. Recording stops.
You cannot stop recording with [ , STOP] during timer recording.
To stop timer recording, press [
5 seconds.
For your reference
If you fast-forward, rewind, or skip during Time Slip, only the play
images are shown.
The sound for the images being played is heard during Time Slip.
The length of the recording determines the amount of time you can
select for time slip. As the recording progresses, the amount of time
you can time slip also increases.
A
, POWER], then [ , STOP] within
29
RQT6035
Advertisement
Table of Contents
