Uniden EXT 1760 Owner's Manual page 25

NOTE
If you select No, then the
Caller ID screen returns.
HINT
The < and > keys to toggle
between the names display
and the numbers display.
Storing a Caller ID Number Into a Memory Location
1) Press , and the Caller ID
call id
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Press ; or : to find the number that
you would like to store, then press
to store the selection.
memory
3) The select location screen appears. Use
the : and ; keys to select a blank
memory location where you would like to
store the number. (If you want to replace
an existing number with the Caller ID
number, skip to step 5.)
4) Press . A confirmation tone sounds, and the number is
select/ch
programmed. (Do not complete steps 5 and 6.)
5) If you choose to replace an existing
number with the Caller ID number,
press and the following
select/ch,
screen appears.
6) Use the : key to move the cursor to
confirmation tone sounds, and the number is programmed.
Deleting a Caller ID Number
To delete a single Caller ID message, follow the steps below.
1) Press , and the Caller ID
call id
summary screen appears. The screen
shows the number of new callers and
the total number of callers stored in
Caller ID memory.
2) Select the number that you would like to
delete. Press ; to scan forward and : to
scan backwards through the list.
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
817-555-1212
Select Location
1> KAYSIE SCHLITZ
2 UNIDEN
Replace Memory?
Yes
> No
Yes
and press
select/ch
New : 01
Total : 02
12/21 12:30PM 03
Schlitz Kaysie
817-555-1212
. A
23