Uniden EXP900 User Manual page 11

Mounting Directly on a Wall
If you do not have a standard wall plate, you can mount the
EXP900 directly on a wall. Before mounting your cordless
telephone, consider the following:
Select a location away from electrical cables, pipes, or other
items behind the mounting location that could cause a
hazard when inserting screws into the wall.
Make sure the wall material is capable of supporting the
weight of the Base Unit and Handset.
Use #10 screws with anchoring devices suitable for the wall
material where the Base Unit will be placed.
1. Insert two number 10 screws,
with the appropriate anchor
device, in the wall 3 5/16 inches
apart vertically, allowing about
1/5 of an inch between the wall
and screw heads for mounting
the phone. Make sure the
screws are securely fastened,
and that the wall material is
capable of supporting the
weight of the Base Unit;
otherwise, damage to the Base
Unit could result.
2. Plug the AC Power Cord (1)
and the Long Telephone Cord
(2) into the Base Unit.
11
3 5/16"
1 2