Sharp SDW6888JS Operation Manual page 16

GETTING STARTED
FILLING THE RINSE AID DISPENSER
Your dishwasher is designed to use a liquid rinse aid.
Do not use a solid or bar-type rinse aid. Under normal
conditions, the rinse aid will last approximately one
month. Try to keep the reservoir full, but do not overfill.
1 Turn the dispenser cap to the left and lift it out.
Sight Window when viewed from above
Full
Add
2 Add rinse aid up to the maximum indicator level.
Dispenser cap
3 You can adjust the amount of the rinse aid released during the
rinse operation. A higher number indicates a larger amount
of rinse aid released. If dishes are not drying or are spotted,
adjust the dial to the next higher setting. If the dishes have
sticky, whitish stains, or if glassware or knife blades have a
bluish film, adjust the dial to a lower setting.
Less
Dispenser cap
4 Replace the dispenser cap.
HEAT DRY FUNCTION
The Heat Dry function is used with rinse aid to enhance drying
performance. If Heat Dry is not selected, items in the load may
not be completely dry at the end of the cycle.
FILLING THE DETERGENT DISPENSER
1 Push the dispenser cover latch downward and open it.
2 Add the detergent to the main wash compartment.
3 Close the dispenser cover.
More
16
Cover Blue Cover Latch
Detergent Cup