Philips 6000 Series Instructions Manual page 17

• Resumption of cleaning/wakeup of main unit: After a pause, press the Start button on the main unit or
the App again to continue the cleaning task. If the main unit is inactive for too long (over 10 min), it will
enter the Sleep mode, with a diminishing brightness of its power indicator. Press the Start button on the
main unit to wake it up. The robot will automatically shut down if left in Sleep mode for more than 12 h.
Restart is required for use again.
• Return to the docking station & ending of task: To call back the robot to the station, press the
Recharging button on the main unit or enable the recharging function on the App, in which case the
robot will return to the station/enable mop washing and recharge. By default, the robot will automatically
return to the station to wash the mop after cleaning certain area. After that, it will continue the cleaning
task. After finishing the cleaning task, the robot will automatically return to the station to clean and air-
dry the mop, recharge, and the like.
Note: After each cleaning task, timely clean the dust bin and water tank.
• Timely clean the dust bin and water tank: Upon completion of the cleaning task, timely remove the
dust in the dust bin of the main unit and the dirty water in the water tank of the docking station to avoid
odor and bacterial growth due to long-term storage of dust and dirty water.
17
English