•
The maximum surmountable obstacle height of the robot is 20 mm. If the threshold of the living room or
other rooms is higher than 20 mm, the robot may not be able to access it.
20mm
Installation before use
Installation of docking station ramp: Take out the docking station ramp from the package, install it
•
at the base plate connection directly in front of the station, then press it downward, and complete the
installation when you hear a "clicking" sound. To remove the ramp for cleaning, lift it upward from the
side handle.
Installation position of docking station: Install the docking station on a level surface, flat against a wall.
•
Make sure there is no obstacle 1.5 m in front of the station or 0.5 m on either side.
12
English