Table of Contents
Advertisement
If you select a memory
location that does not
have a stored number,
the handset will beep
rapidly and the phone
will not dial.
[ 26 ]
M E M O R Y D I A L I N G
Memory dialing from Talk Mode
1) Press talk/flash. ¨
volume setting appears.
2) Press memory.
3) Enter a number (0 - 9) to select the memory location of
the desired phone number. The selected phone number is
displayed. Then the number is dialed.
4) To hang up, press end.
Chain Dialing
The memory locations on the handset are not limited to phone numbers. You can also
store a group of numbers (up to 20 digits) that you need to enter once your call
connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and
are prompted to enter the account number, simply press memory and the location
number where the special number has been stored.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 21.)
¨ and the
Advertisement
Table of Contents
