Table of Contents
Advertisement
• You cannot make a
call from the Caller ID
list if your EXI2246
series is connected to
a private branch
exchange (PBX).
• When a long distance
call has been set, ¨ ¨
appears in the
display.
[ 36 ]
C A L L E R I D F E A T U R E S
Using the Caller ID List
Calling a party from the Caller ID list
You can place a call from the Caller ID list. The EXI2246 series stores up to
30 messages.
1) Press call id/menu. Select the phone number that you want
to dial by pressing
2) Press talk/flash. The displayed phone number dials
automatically.
Long Distance calls and Area Code Setting/Cancellation
Pressing 1 while the incoming Caller ID information is displayed (in step 1) will
place the prefix "1" in the display to set up for a long distance call. Pressing 3 will
set or cancel an area code setting.
Dial edit
You can temporarily edit the Caller ID number that is displayed by pressing select .
A cursor appears in the display. Press delete/ch to move the cursor left, make your
changes and then press talk/flash. This will not change the number in the Caller ID
list memory.
If you want to save this new number, store the information in memory.
(See page 37.)
or
.
Advertisement
Table of Contents
