Memory Dialing; Storing Phone Numbers And Names - Uniden EXI2246 Series Owner's Manual

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key presses. Your
EXI2246 series stores up to 10 names/numbers in the handset.
1) Press and hold memory until ¨
2) Press or , or enter a number (0 - 9) to select the
memory location where you would like to store
the number.
3) Press select. The following screen appears and a cursor
flashes indicating that the display is ready for the name to
be entered.
If this screen appears, the selected memory location is
already stored. Then you must either edit the entry in
this location, delete the entry in this location, or select
¨ ¨ to choose another location.
4) To enter a name (up to 14 characters), use the number keys.
• See the "Steps for entering names and special characters". (See pages 23-24)
*
• Use #/ and /tone/
• Use delete/ch to delete characters as needed.
• Press and hold delete/ch to delete all the characters.
• If a name is not required, go to step 5.
¨ is displayed.
to move the cursor to the desired location.
• In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 30 seconds
after pressing
memory to enter the
number you wish to
store. Otherwise, an
error tone will sound.
M E M O R Y D I A L I N G [ 21 ]