Table of Contents
Advertisement
XS215.Qx
10/21/03 5:45 PM
In memory dialing
operation, you must press a
key within 30 seconds or
the phone will return to the
standby mode. If you return
the handset to the base, the
phone will return to the
standby mode also.
MEMORY DIALING
16
Page 16
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 20 names/numbers in the handset.
1) Press
, ¨
Select Memory
2) Press
or
keys, enter a two digit number.
(
) to select the memory location where you would like to
store the number.
3) Press
or
.
4) Press
or
. The following screen appears and a cursor flashes
indicating that the display is ready for the name to be entered.
If this screen appears, the selected memory location is already stored. Then you
must either edit the entry in this location, delete the entry in this location, or select
¨
Go Back
¨ to choose another location.
5) To enter a name (up to 13 characters), use the number keys.
• See the "Steps for entering names and special characters". (See page 18).
/
/ keys to move the cursor to the desired location.
• Use
and
• Use
to delete characters as needed.
• Press and hold
to delete all the characters.
• If a name is not required, go to step 6.
¨ is displayed.
Select Memory
01
02 JOHN DOE
01:(Empty)
Press Select
to edit
Store Name
Edit Memory01
Delete Memory01
Go Back
Advertisement
Table of Contents
