Table of Contents
Advertisement
i
REAR SPEAKER
TERMINAL
CONNECTIONS
Connect alter turning the power to the TV OFF.
Press the Right Speaker red button and insertthe positive(+) lead wire into the hole next to the button. Once the wire
is in place, pull the red buttonbackto originalpositionand the wire is lockedintoplace. In the same manner, press the
Right Speaker black button and insert the negative(-).lead wire. Repeat this procedure for the Left Speaker.
CAUTION:
TO
EXTERNAL,_
SPEAKER
Do not short speaker terminals, (do not connect a wire directly across any two terminals). This
could cause damage to your audio outputs or damage your TV in other ways.
i
i
I
,/_AUTION:
Do not connect Speakers simultaneously
to the REAR SPEAKER terminal of the Projection
TV
and an external amplifier. This could damage both the TV and the speakers.
Your TV was
designed to use 8 Ohm speakers only. Any other type may degrade the audio performance of
your entertainment
system.
/
w
Jj
f
PROJECTION "rv
SPEAKER
AMPLIFIER
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection
is provided for high performance
laser discs, VCR's, etc., that have this feature. Use this
connection in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information
on connecting your hook-up
cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot
record its own video or line output
(INPUT: 1 in the example on p. 11). Refer to your VCR operating guide for more information on "line"
input-output
connections.
12
Advertisement
Table of Contents
