Table of Contents
Advertisement
Connect after turning the power of the "FVOFF.
• Press the Right Speaker red button and insert the positive lead wire + into the hole above the button. When the button
is released, the wire is locked into place. In same manner, press the Right Speaker black button and insert the negative
lead wire -. Repeat this procedure for the Left Speaker.
TO
EXTERNAL_
SPEAKER
®
®
EXT.
CAUTION:
DO not connect Speakers simultaneously to the REAR SPEAKER terminal of the Color TV and Amplifier.
This could damage both the Color "IV and the Speakers.
Your Hitachi TV was designed to use 8_ speakers only. Any other type may degrade the audio
performance of your entertainment system.
H_ACHICOLORTV
SPEAKER
AMPLIFIER
• The S-Video connection is provided for high performance laser discs, VCR's, etc., that have this feature. Use this
connection in place of the standard video connection if your device has this feature.
• If your device has only one audio output, connect it to the left audio jack on the TV.
• Refer to the operating guide of your other electronic
equipment
for additional
information on connecting
your
hook-up cables.
• A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot
record its own video or line
output (Input 1 in the example on page 12). Refer to your VCR operating guide for more information on "line" input-
output connections.
13
Advertisement
Table of Contents
