Uniden EXAI7980 Owner's Manual page 7

Step 2
(continued)
Connect the base unit
If you want to install the base unit on the wall, see page 47.
3
Note
Place the power cord where it will not create a trip hazard, or where it could become
chafed and create a fire or electrical hazard.
1
Connect the telephone line cord to the
TEL LINE jack and to a telephone
outlet.
Note Until the handset battery is
fully charged, you can only
answer incoming calls at the
base unit.
2
Connect the AC adapter to the
DC IN 9V jack and to a standard
120VAC wall outlet.
3
Set the base unit on a desk or tabletop
and place the handset on the base
unit.
Then raise the antenna to a vertical
position.
7