Uniden EXA2245 Owner's Manual page 27

Setting the ring time
The ring time setting allows you to set the number of rings the caller hears
before your answering system plays the outgoing message. You can set the ring
time to answer after two, four, or six rings. Setting
answering system picks up after two rings if you have new messages, and after
four rings if there are none. This way, if you make a long distance call to check
your messages, you can hang up after the second ring to avoid billing charges.
status
delete play/
stop
repeat/rew skip/ff
set/ringer menu greeting memo
ans on/off find hs volume
1)Press menu three times.
You hear "Ring time" and the current ring time ([
[ ] 4, [ ] 6, [
the base.
2)Press repeat/rew or skip/ff until the desired ring
time appears.
3)Press set/ringer to select the new ring time. You hear
a confirmation tone, then the announcement "Ring
time" and the new ring time is announced.
(Toll Saver), the
] Toll saver), and it is displayed on
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
] 2,
[ 25 ]