One-Touch Rocketdial; Chain Dialing; Erasing A Stored Number From Memory - Uniden EXA2245 Owner's Manual

You cannot erase the
phone numbers by
using the RocketDial.
This is the number
stored in memory
location 1.
[ 20 ] M E M O R Y D I A L I N G

One-touch RocketDial

Your phone is equipped with "One-touch RocketDial" for instant dialing. It is used
to dial the phone number stored in memory location 1. (See "Storing a Phone
Number in Memory".)
To instantly dial the phone number stored in memory location 1, simply press
RocketDial. (There is no need to press talk. The phone will automatically dial.) If
you press RocketDial, and a phone number is not stored in memory location 1, the
phone will beep rapidly and will not dial.

Chain Dialing

The memory locations on the handset are not limited to phone numbers. You can
also store a group of numbers (up to 16 digits) that you need to enter once your
call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank,
and are prompted to enter the account number, simply press m and the location
number where the special number has been stored.
Store your special number with an identifying name. (Refer to "Storing Phone
Numbers and Names" on page 19.)

Erasing a Stored Number from Memory

1) Remove the handset from the base unit.
2) Press m twice.
3) Press the memory location (0-9). You hear a confirmation tone and the stored
number is erased from memory.