Uniden EXA2245 Owner's Manual page 25

Setting the Time
The clock on the EXA2245 answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
status
delete play/
stop
repeat/rew skip/ff
set/ringer menu greeting memo
ans on/off find hs volume
1)Press menu.
The system announces "Time" and the current time. The
message counter displays the current numbers ([
through [ ]) indicating the day of the week.
2)Press skip/ff or repeat/rew until the correct day is
announced. The numbers [
displayed on the base.
3)Press set/ringer to select the day.
4)Press skip/ff or repeat/rew until you hear the correct
hour setting. The numbers [ ] through [
displayed on the base as each hour is announced.
5)Press set/ringer to select the hour.
6)Press skip/ff or repeat/rew until you hear the correct
minute setting. The numbers [
displayed on the base as each minute is announced.
] through [ ] are
] through [
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
]
• Normally the idle
time for the menu
mode is 30 seconds
before the system
returns to standby.
] are
However for setting
the time, the idle
time is extended to
two minutes.
• Press and hold
skip/ff or
] are
repeat/rew to
quickly scroll
through the numbers
on the display.
[ 23 ]