Philips AROFLEX CRYPTO EQUIPMEN UA8116 Series Operating Instructions Manual page 12

RESTRICTED
P o s N a m e
1 6 Ta p e r u n o u t
1 7 Ta p e b a c k s p a c e r
18 Tape retaining catch
1 9 Ta u t - t a p e c o n t a c t
2 0 Ta p e r e a d e r o n / o f f
2 1 Ta p e r e a d e r c o v e r
2 2 S P E C A T l o c k
Function
Spring-loaded button for punching "Letters" continuously, regardless
of operating mode or punch activation.
Spring-loaded button for backspacing the tape for correction ("let
tering out"); tape is backstepped one character when the button
is pressed firmly.
Small two-position catch under the plastic cover, used for lifting
the tape retaining pad when a new tape is being inserted; when the
catch is pressed home, the punch automatically punches approximately
20 "Letters".
Tape for reader must be passed upwards over this contact so that a
jammed tape will stop the reader.
Spring-loaded button for starting and stopping the tape reader; when
tape has been inserted and the cover (21) is closed, pressing the button
for a very short time (less than 1/4 second) will advance the tape one
character. Pressing the button for a longer time (about 1/2 second)
will make the reader step continuously. Pushing the button whilst
the reader is stepping will stop the reader.
Catch-retained cover for opening the tape reader so that a tape can
be inserted, engaging the transport holes in the sprocket wheel.
Lock for inserting and turning the physical SPECAT key for operating
with key stores X or Y.
The necessity for turning the SPECAT key is indicated by the fast
blinking of the CORRECTION lamp (13).
RESTRICTED