Uniden DXAI5588-3 Series Owner's Manual page 55

Symptom
The handset doesn't
communicate with the main
base or the other handset.
No 3- way conversation.
The answering system does not
work.
The answering system does not
record any messages.
Messages are incomplete.
After a power failure, the
outgoing message is deleted.
No sound on the main base
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another
touch-tone phone.
www.uniden.com
• Re-register all handsets (see page 13).
• Only one handset at a time can talk with an outside caller. To allow the other hand-
set to talk to the caller, transfer the call.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering system is turned on.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
• Record your personal outgoing message again. The default message should remain.
• Adjust the speaker volume on the main base.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least
two seconds. If it cannot, you may have to use another phone to access your
messages.
Suggestion
T R O U B L E S H O O T I N G [ 55 ]