Uniden DXAI5588-3 Series Owner's Manual page 40

Even when the main
base ringer is turned off,
the handset will still
ring.
[ 40 ] S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
Choosing between the two outgoing messages
With the phone in standby mode, press the greeting key to play the current outgoing
message. While the outgoing message is playing, press the greeting key again to
switch between the prerecorded greeting and the personal greeting. After the
message finishes playing, a confirmation tone is heard.
To delete the personal greeting, press the
announces "Greeting has been deleted."
Setting the Main Base Ringer Volume
The main base has three ringer volume settings: high, low, and off. You can change
the ringer volume while in standby mode or while an incoming call is ringing.
key during the announcement and the system
1) Press the ringer key.
You hear the ringer at the current volume level
([ ] High, [
main base ringer volume to off, "Ringer off" is
announced) and it is displayed on the main base.
2) Press the ringer key repeatedly until the desired ringer
option appears.
3) The system displays the new ringer volume.
] Low, [ ] off) (if you set the
www.uniden.com