Uniden DXAI5588-3 Series Owner's Manual page 25

5) is displayed. The cursor flashes indicating
that the phone is ready for the number to be entered.
6) Use the keypad to enter the phone number; each number
can be up to 20 digits.
If you need the phone to pause during the dialing sequence,
press the redial/pause key to insert a two-second delay
between the numbers. You can enter multiple pauses to
increase the delay. Each pause counts as a digit. The
display shows a for every pause.
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for
more than 30 seconds, it will beep rapidly, and the phone will return to standby mode.
7) Press the memory key. You will hear a confirmation tone,
and the following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the
speed dial memory entries.
8) Press the end key to exit memory setup mode. The phone
returns to standby.
www.uniden.com U S I N G T H E S P E E D D I A L M E M O R Y [ 25 ]