Uniden DXAI5588-3 Series Owner's Manual page 39

Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset
message or your own greeting.
Preset message
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
If the answering machine is set to announce only, the preset greeting automatically
changes to:
"Hello. No one is available to take your call. Please call again."
See "Selecting the Message Record Time" on page 37 on how to set the announce only
feature.
Recording a personal outgoing message (Greeting)
1) With the phone in standby mode, press and hold the greeting key.
You will hear the announcement "Record greeting" and a confirmation tone.
[ ] flashes on the message counter.
2) Start recording your message. You have 30 seconds, and the message counter
starts to count down [
3) When you are finished recording your greeting, press the greeting,
key. You hear a confirmation tone, and then your greeting plays back for you.
www.uniden.com
] to [ ] every second.
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M
• Your greeting must be
more than 2 seconds
and less than 30
seconds to record.
• Position yourself as
near to the main
base's microphone as
possible and speak
or set
clearly when recording
your outgoing message.
[ 39 ]