Using Your Answering System - Uniden DXAI3288-2 Series Owner's Manual

Using Your Answering System

The message counter displays the number of messages stored in memory. If the
display flashes, then there are new messages waiting for you. The flashing
number represents the number of new messages, not total messages. The cordless
phone is designed to play your new messages first. After you play all your new
messages, you can then play your old messages.
When the answering system is full,
remaining time". You should delete some messages so that the system can record new messages.
(Refer to "Deleting a message" on page 49.)
Playing your messages
Digital Answerer
charge/in use
answer on/off delete
find hs memo rec greeting ringer
clock/menu set
select/volume
mic
www.uniden.com
is displayed on the base, and the system announces "No
1) Press the key.
The system announces the number of new and old
messages. The LED displays the number of new messages,
and the number flashes. The day and time that each
message was received is announced after the message
is played. The message counter displays the number of
current messages stored.
When all new messages have been played, you hear
a confirmation tone and an announcement "End of
messages". The system returns to standby.
2) After you have reviewed your new messages, you can
play your old messages by again pressing the
Once you have listened to a new message, it becomes an
old message. The old messages will be played in the
order in which they were received.
T H E I N T E G R A T E D A N S W E R I N G D E V I C E
To stop playing your
messages, press the
key again at any time.
key.
[ 47 ]