Uniden DXAI3288-2 Series Owner's Manual page 25

6) Press the mem or select/channel key. "
is displayed. The cursor flashes indicating that the display
is ready for the number to be entered.
7) Use the number keys to enter the phone number.
The phone number cannot exceed 20 digits.
Use the redial/pause key to enter a pause in the dialing sequence.
The display shows a " ". Each pause counts as one digit and
represents a two second delay of time between the digits.
Use the delete/transfer key to delete digits as needed.
8) Press the mem or select/channel key. You will hear a confirmation
tone, and the following screen appears. Memory storage is complete.
For example, if you store a name and number into memory
location number 01, the display shows "
After about 2 seconds, the following screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9) Press the end key to return to the standby mode.
www.uniden.com
"
".
M E M O R Y D I A L I N G
• The pause feature
is useful for long
distance calling,
credit card dialing,
or sequences that
require a pause
between digits.
• The pause key counts
as one digit. Pressing
the redial/pause
key more than
once increases the
length of a pause
between numbers.
[ 23 ]