Table of Contents
Advertisement
Remote
Control
Functions:
Special Functions
When your remote control has been Programmed
to operate another manufacturer's
product,
the function
performed
on each layer may vary. The most common functions
are:
oMitsubishi
VCRs will be com
with additional
buttons
o POWER
• ENTER
(on some models)
oCHANNEL
up/down
•CANCEL
(on some models)
• 0-9 Number
Buttons
(on some models)
oADJUST
up/down/left/right
(on some models)
• GUIDE
(on some models)
oPOWER
*VOLUME
• MUTE
oDirect
Input
Selection
Buttons
-use number
buttons,
SQV, and QV (on some models)
• 0-9 Number Buttons
3n some
(on some
Remote Control Functions:
Operation
of PIP and POP
Picture-In-Picture
(PIP) and Picture-Outside-
Picture (POP) features allow you to view
Programming
in different ways. While watching
the main screen, you can display programs
from
other channels and other inputs.
To see which
inputs can and cannot be used together, see How
Connections
Affect the PIP and POP, page 22. You
can display large and small PIPs, or one POR
Activating the PIP and POP
Press PIWPOP
to choose a display format.
Each
time the PIWPOP
button is pressed on the TV
remote control (within 3 seconds of each other),
the PIP/POP
cycles through
the following display
options.
1. POP:
one POP
2. PIP:
large PIP
3. PIP:
small PiP
To turn PIWPOP
Off, wait at least 10 seconds,
and press PIWPOR
The next time you activate
PIWPOP,
the last used PIWPOP
format will be
displayed first.
29
Advertisement
Table of Contents
