Table of Contents
Advertisement
Connecting
an Audio
Receiver
Stereo Audio System
(recommended
for shelf units or A/V receivers
without
digital audio inputs)
(Figure
7)
1.
Connect
the audio cables from AUDIO
OUTPUT
on the TV side panel to TV IN or AUX
IN terminals
on the back of the audio system.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
2.
Turn offthe
TV's speakers
through
the AUDIO/
VIDEO
SETTINGS
Menu,
page 50.
3.
Set the audio system's input to the TV or AUX
position to hear the TV's audio through your
stereo system.
[]
TV side pane[
- left
R_d
WhFte
Figure Z Connectingthe
StereoAudio
System.
A/V Receiver
(Figure
8)
.
Connect either a video cable or an S-Video cable
(but not both) from VIDEO
MONITOR
OUT on
the back of the A!V receiver to VIDEO INPUT-1
or INPUT- 2 on the TV side panel.
2.
Connect a set of audio cables from AUDIO
OUTPUT
on the TV side panel to AUDIO
TV
IN on the back of the A/V receiver.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
f
TV _e
panel
_elt
AV Rece_wr/back
pand
_ect_o_)
[]
Re_ Awhile
11' _111
9@
9@
_ft_
H
A_tad_
cab_
type
Figure&
ConnectingtheA/VReceiver.
17
Advertisement
Table of Contents
