Table of Contents
Advertisement
Connecting
a DVD Player or Other S-Video Device
[]
f
1V _de pand.
fight
DVD back
panel
Figure 9. Connecting
a DVD Player with Component
Video.
iMPORTANT
[]
Amy S-Video
Device
•
i
wh_t,,
J
Figure lO. Connecting an S-Video Device.
DVD Player/Video
Game with
Component
Video
(Figure
9)
.
Connect the Component
Video cables from
(YCbCr
or YPbPr) VIDEO OUT on the back of
the DVD player to COMPONENT
(1 or 2) on
the TV side panel. The correct connections are:
A. YtoY
B. Cb or Pb to Pb
C. Cr or Pr to Pr
2.
Connect a set of audio cables from AUDIO OUT
on the back of the DVD player to COMPONENT
AUDIO Input (1 or 2) on the TV side panel.
• The red cable connects to the R (right)channel
• The white cable connects to the L (left) channel
NOTE:
Some video game systems support component
connections.
Please refer to your video game
console Owner's Guide.
NOTE:
If your DVD player supports progressive
scan playback, be sure to set your player
accordingly. Please refer to your DVD player's
Owner's Guide.
Other S-Video Device
(Figure
10)
1.
Connect
an S-Video
cable from VIDEO
OUT
on the device back panel to VIDEO
INPUT-1
or
INPUT-2
on the TV side panel.
2.
Connect
a set of audio cables from AUDIO
OUT
on the device back panel to AUDIO
INPUT-1
or
INPUT-2
on the TV side panel.
• The red cable connects to the R (right) channel
• The white cable connects to the L (left) channel
If your S-Video Device is mono (non-stereo), connect
only the white (left) cable.
18
Advertisement
Table of Contents
