Pickering 40-880A User Manual page 12

SECTION 1 - TECHNICAL SPECIFICATION
Specifications & Ordering Information
Specification
RF Frequency Range:
Insertion Loss:
VSWR COM to Channel:
VSWR Channel to COM:
VSWR Internal
termination:
Isolation:
Crosstalk bank to bank:
Maximum RF Power:
Maximum DC Voltage:
Life Expectancy:
Operate Time:
RF Switching Time:
RF Connectors:
Power Requirements
+3.3 V +5 V
30 mA 100 mA
Operating/Storage Conditions
Operating Conditions
Operating Temperature:
Humidity:
Altitude:
Storage and Transport Conditions
Storage Temperature:
Humidity:
Altitude:
Page 1.4
10 MHz to 8 GHz
(useable to 8.5 GHz)
Typically <2 dB @ 10 MHz
Typically <2.5 dB to 3 GHz
Typically <3 dB to 5 GHz
Typically <4 dB to 8 GHz
Typically <1.4:1 to 6 GHz
Typically <1.8:1 to 8 GHz
Typically <1.5:1 to 5 GHz
Typically <1.8:1 to 8 GHz
Typically <1.4:1 to 8 GHz
Typically >75 dB to 3 GHz
Typically >65 dB to 6 GHz
Typically >60 dB to 8 GHz
Typically <-80 dB to 3 GHz
Typically <-70 dB to 8 GHz
+36 dBm CW
+38 dBm Pulsed
+20 dBm hot switching
+26 dBm into terminations
7 V (AC coupled)
Indefinite when used within
ratings
50 µs
10 µs typical rise and fall time
SMA
+12 V -12 V
0 0
0 °C to +55 °C
Up to 90 % non-condensing
5000 m
-20 °C to +75 °C
Up to 90 % non-condensing
15000 m
50Ω SPDT TERMINATED 8GHz RF SWITCH 40-880A
50 Ω SPDT Terminated 8 GHz Switch, 40-880A
Mechanical Characteristics
Dual version (40-880A-001): 1 slot 3U PXI (CompactPCI card).
Quad version (40-880A-002): 2 slot 3U PXI (CompactPCI card).
Hex version (40-880A-003): 3 slot 3U PXI (CompactPCI card).
Octal version (40-880A-004): 3 slot 3U PXI (CompactPCI card).
3D models for all versions in a variety of popular file formats
are available on request.
Connectors
PXI bus via 32-bit P1/J1 backplane connector.
Signals via front panel mounted coaxial connectors.
Product Order Codes
Dual SPDT Terminated 8 GHz RF Switch
Quad SPDT Terminated 8 GHz RF Switch
Hex SPDT Terminated 8 GHz RF Switch
Octal SPDT Terminated 8 GHz RF Switch
Mating Connectors & Cabling
For connection accessories for the 40-880A series please
refer to the 90-011D RF Cable Assemblies data sheet
where a complete list and documentation can be found for
accessories, or refer to the Connection Solutions catalog.
PXI & CompactPCI Compliance
The module is compliant with the PXI Specification
2.2. Local Bus, Trigger Bus and Star Trigger are not
implemented.
Uses a 33 MHz 32-bit backplane interface.
Safety & CE Compliance
All modules are fully CE compliant and meet applicable
EU directives: Low-voltage safety EN61010-1:2010,
EMC Immunity EN61326-1:2013,
Emissions EN55011:2009+A1:2010.
pickering
40-880A-001
40-880A-002
40-880A-003
40-880A-004
pickeringtest.com