Call Transfer Feature - Uniden DCT6465 Series Owner's Manual

note
For model number
verification, contact
Uniden Customer Service
or visit our website
www.uniden. com
[ 5 4 ] E X P A N D I N G Y O U R P H O N E
From the base to a handset
1) Press intercom on the base in standby mode.
2) Select the handset you want to talk with by pressing the number key (1-4).
To page all the handsets press
3) Follow the steps 3-4 under "From handset to handset or to the base."

Call Transfer Feature

From handset to handset or to the base
1) During a call, press hold/transfer/int'com on the handset.
2) Select a handset or the base to transfer the call within
10 seconds. (Refer to step 2 in the intercom section on
page 53).
The call will automatically be placed on hold, and an
intercom tone sounds.
To cancel the transfer, press talk/flash or speaker on the initiating handset.
3) On the receiving handset, press talk/flash or hold/transfer/int'com (or
intercom on the base) to answer the page. Or press any number key,
(when Any Key Answer is on), or pick up the handset from the cradle (when Auto Talk
is on).
4) To speak to the caller, press talk/flash (or
/tone.
*
(speaker) on the base) on the receiving handset.
(speaker) or
/tone/←, or #/→
*
w w w . u n i d e n . c o m