Using One Touch Voice Mail Access - Uniden DCT6465 Series Owner's Manual

Using One Touch Voice Mail Access

note
You must subscribe to
voice mail service from
your telephone company
in order to use this
feature. The voice mail
service company will
provide you with the
access number.
[ 3 6 ] B A S I C S
If you subscribe to voice mail service, you can use your phone to access your voice mailbox.
The new message LED flashes whenever you have messages waiting in your voice mailbox.
Just program the handset with your access number, and you can get your messages at
the touch of a button on the handset. (The voice mail service provider will supply you
with the access number. This number may be simply a phone number. Refer to the
provider's literature).
•To program or delete your Voice Mail Access Number, See page 21.
Dialing your Voice Mail Service
Once you've programmed your personal access number, you can dial your mailbox with
the touch of a button. When you have messages, simply pick up the handset and press
select/ . If you have not entered the access number or it has been deleted, when you press
the select/ ,
No Nu mb e r S to r ed T o s t or e n u mb er pr e ss [M EN U ]
hear a beep. The phone returns to standby mode.
Voice Mail Access
The new message LED on the handset is designed to work with your voice mail service
provided by your local telephone company. The LED flashes when you have new incoming
messages in the voice mail service. You may need to occasionally reset the indicators if they
remain on after you've retrieved your messages. To reset the indicators, when the phone is
in standby mode press and hold find handset on the base until the paging sound stops
(about 5 seconds).
appears and you will
w w w . u n i d e n . c o m