Uniden D3288-2 User Manual page 4

Connect the Power and Telephone Cords
1. Connect the base AC adapter to the
jack. Route the cords as shown:
TEL LINE
For desktop use
DESK
DESK
WALL
2. Plug the AC adapter into a standard 120V AC power outlet, and connect the
telephone cord to a standard telephone wall jack.
3. If you are mounting the phone on the wall, place the mounting slots over the pins
on the wall plate; slide the base down to lock it into place.
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone and the
display on the base should say Talk. When you get a dial tone, make a quick test call.
If...
the display says Check TEL Line
you don't hear a dial tone
you keep hearing a dial tone
Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing,
you need to change your phone's dial mode.
1. Press Menu and choose
Dial Mode
2. Select
To send DTMF tones during a call (e.g., for an automated response system), press
to temporarily switch to tone dialing. When you hang up, the phone automatically
returns to pulse dialing.
 - English
WALL
or
Global Setup.
then Pulse. You'll hear a confirmation tone.
jack and the telephone cord to the
AC IN 7.8V
For wall mount use
DESK
WALL WALL
Try...
checking the connection between the
base and the phone jack.
changing to pulse dialing.
DESK
*